10" Ground Stakes

10" Ground Stake for C7 & C9 Christmas Lights

A heavy-duty 10" ground stake built for contractors installing landscape and pathway lighting on commercial and residential properties. Double the length of a standard 5" stake — drives deeper for stronger anchoring in loose soil, mulch, and high-wind exposure conditions. Accepts C7 or C9 sockets, holds the bulb upright, and protects the socket wire across a full season of outdoor use.

Built for the Job

10" stake length. Drives deep enough to anchor solidly in loose mulch, soft soil, recently-tilled garden beds, and exposed sites where a shorter stake would work loose. The extra length is the difference between a pathway run that holds straight through January and one the homeowner finds tilted sideways after the first windstorm.

Fits C7 and C9 sockets. Accepts both standard C7 (E12 base) and C9 (E17 base) socket wire — one stake design covers both bulb sizes on residential and commercial jobs. Compatible with SPT-1 and SPT-2 stringer lines.

Bulb-up orientation. Each stake holds the bulb pointing straight up — the correct orientation for ground-level pathway and outline lighting, where you want the light cast upward and outward rather than buried in the mulch.

Solves the "hard-to-clip socket" problem. Sockets that traditionally won't take a clip cleanly — the ones contractors fight with on every job — mount easily to the ground stake. No more wrestling with hardware that doesn't fit the application.

Protects socket wire integrity. Many ground-level mounting methods pinch, twist, or stress the socket wire over a season of weather and wind, which leads to bulb failures and shorts at the connection point. This stake holds the socket without compressing the wire — your stringers come out of the ground in the same condition they went in.

UV-stabilized heavy-duty plastic. Built to survive sun, rain, freeze-thaw cycles, and the abuse of being driven into hard ground season after season.

Designed for Speed

Push-in installation. No drilling, no anchoring, no concrete. Push the stake into soil, mulch, or sod by hand or with a soft mallet for harder ground. Crews move quickly along long pathway runs and commercial outlines.

Pulls out clean at takedown. End of season, pull the stake out of the ground. No residue, no buried hardware, no cleanup work for the landscaping crew next spring.

No socket damage. Because the stake supports the socket from below rather than clamping around the wire, your stringer comes off the stake at takedown without the stress damage that other clip types build up over a season.

When to Reach for the 10" Over the 5"

The 10" ground stake is the right call when ground conditions or exposure make a standard 5" stake unreliable:

• Loose or freshly-tilled mulch — deep mulch beds don't give a short stake enough material to grip
• Sandy or loamy soil — soft soils that won't hold a shallow stake against wind load
• Coastal and high-wind sites — exposed properties where wind loading on the bulb-and-strand puts more force on the stake
• Tall ornamental grass or low ground cover — landscape contexts where the bulb needs to clear surrounding plant material to be visible
• Commercial installs requiring extra stability — long-duration commercial holiday displays where any failed stake is a callback
• Snow-load regions — areas where the stake needs to anchor below the typical snow accumulation depth

For standard residential pathways in firm soil with normal weather exposure, the 5" stake handles most jobs. The 10" is the upgrade for the conditions that defeat it.

Where the Ground Stake Wins Jobs

Ground stakes open up install opportunities that traditional gutter and shingle clips can't touch:

• Commercial property outlines — pathway lighting along walkways, plaza edges, parking medians, and entry drives
• Asphalt driveways — outline lighting along the driveway edge where there's no roof or fascia to clip to
• Mulch beds and planting bed borders — landscape lighting that defines the bed edge for a clean outdoor display
• Residential walkways — front-yard pathway lighting from sidewalk to front door
• Lawn edges and grass borders — temporary outline lighting that comes out clean at takedown
• Pool deck and patio edges — perimeter lighting for outdoor entertainment spaces

The ground stake also pairs naturally with rooftop installs — a full property package where the gutter line gets clips on top and the driveway or walkway gets ground stakes at the bottom.

Trusted in Our Contractor Community

40,000+ professional Christmas light installers in our network rely on ground stakes for the parts of the property that rooftop clips can't reach. Pair with your preferred C7 or C9 socket wire and bulbs for a complete pathway and landscape lighting system.

Stock for the Season

Available in contractor-sized bags and bulk cases for full-season trailer stocking. Contractor pricing applies on case quantities — reach out for a quote on bigger commercial builds.

Frequently Asked Questions

When should I use the 10" stake instead of the 5"?

Reach for the 10" when ground conditions or exposure make a shorter stake unreliable — loose mulch, sandy soil, coastal or high-wind sites, snow-load regions, or any commercial install where extra stability is worth the cost upgrade. For standard residential pathways in firm soil with normal weather, the 5" stake handles most jobs without issue.

What bulb sizes does the 10" ground stake fit?

Both C7 (E12 base) and C9 (E17 base) bulbs on standard SPT-1 and SPT-2 socket wire. One stake design accepts both sizes, so you don't need separate SKUs for C7 and C9 ground installs.

What surfaces does the 10" ground stake work on?

Anywhere a 10" stake can be driven into the ground — soil, mulch, sod, planting beds, and most lawn types. The 10" length is especially useful for deep mulch beds, sandy soils, and recently-disturbed ground where a shorter stake doesn't have enough material to anchor against. Not designed for concrete, stone, or hard-pack gravel.

Will the ground stake damage my socket wire?

No — that's one of the main reasons it exists. Many ground-level mounting methods pinch or twist the socket wire over a season, which leads to bulb failures and shorts at the connection point. This ground stake holds the socket without compressing the wire, so your stringers come out of the ground in the same condition they went in.

Can the 10" stake be used in snow-load regions?

Yes — that's one of its best use cases. The extra length lets the stake anchor below the typical snow accumulation depth, keeping the bulb-and-socket stable even as snow accumulates around the display. A 5" stake in heavy snow regions can shift or tip as the snowpack moves; the 10" handles that load better.

How do I install the 10" ground stake?

Push the stake into the ground by hand for soft soil or mulch, or tap with a soft mallet for harder ground. Mount the bulb-and-socket into the clip at the top of the stake. The bulb sits upright pointing straight up, ready for the season. At takedown, pull the stake straight up out of the ground — no residue, no buried hardware.

What is the 10" ground stake made of?

UV-stabilized heavy-duty plastic engineered to survive multiple seasons of outdoor exposure, freeze-thaw cycles, and the mechanical stress of repeat install and takedown.

Can I order in case quantities?

Yes. Available in bags for smaller jobs and cases for full-season trailer stocking. Contractor pricing applies on qualifying volumes — contact us for a quote on larger builds.

Orders placed before 2 PM ET ship the same day. Free shipping on orders over $349. Most orders arrive in 2-5 business days via UPS or FedEx Ground.