Free shipping
For all orders over$399
(855)619-LITE
jason@christmaslights.io
C9 LEDs are the backbone of every professional roofline install. The big E17 base bulb that clients see from the street. This is what separates a pro job from a DIY disaster.
C9 bulbs deliver the visibility and impact that residential and commercial rooflines demand. They punch through at 100+ feet. Clients notice the difference immediately compared to smaller bulbs.
We stock Minleon, Tough Bulb, and Opti-Core. Three brands that professional installers trust season after season. Each one passes our quality standards before it hits the shelf.
Every C9 we sell is commercial-grade LED. That means rated for 25,000+ hours, energy efficient, and cool to the touch. No fire risk on shingles or gutters.
Need the full setup? Grab a C9 Pro Light Kit with bulbs, socket wire, clips, and plugs bundled at contractor pricing. Jason Geiman has tested every product we stock on real rooflines across thousands of installs through his contractor network.
What C9 style runs best in your market?
C9 LEDs pull between 0.5W and 0.96W depending on brand and style. That is a fraction of the 7W a traditional incandescent C9 draws. Lower wattage means longer runs, fewer circuits, and zero fire risk on shingles.
With LEDs pulling under 1W each, you can run 800+ C9 bulbs on a single 15-amp circuit. Compare that to roughly 200 incandescent C9s on the same circuit. LEDs let you cover entire properties from one or two outlets.
12-inch spacing is the standard for residential rooflines. It gives a full, professional look without gaps. For commercial buildings with higher rooflines and longer viewing distances, 15-inch spacing works well and saves material cost.
Faceted C9s have a diamond-cut lens that catches light at every angle. Best seller for rooflines. Smooth opaque C9s give a bold, even glow with a classic look. Filament C9s have visible curved filaments for a vintage warm aesthetic. Check our faceted, smooth, and filament sub-collections to compare.
Yes. C9 LEDs use the standard E17 base that fits all C9 socket wire. Drop them into your existing stringers or grab new C9 socket wire for fresh installs.