(855) 619-5483
Free shipping over $349
2 Hole Shingle Tabs
Regular price
$120.00
Couldn't load pickup availability
Got questions?
Feel free to get in touch
Built for installers. Used on real jobs.
This is the gear working contractors run on real rooflines. C9 and C7 LED bulbs, socket wire, clips, plugs, and complete pro light kits at contractor wholesale pricing. Most orders ship same day if placed before 2 PM ET. Free shipping over $349.
The 4-sentence answer
The 2-hole shingle tab is a Christmas light clip designed for shingle roof line where a tab-style anchor with two holes works better than a side-grip clip. Compatible with: Used with screw-mounted shingle clip systems. Pro-installer pattern: pre-clip the stringer at ground level (faster than clipping mid-roof), then mount the pre-clipped line section-by-section. Pairs with C9/C7 socket wire and matching male + female slide-on plugs to build a complete roofline run.
Verified specifications
Every value below is pulled from the printed bag label and the certification mark. No marketing inflation.
| Clip type | 2-hole shingle tab |
|---|---|
| Compatible bulbs | Used with screw-mounted shingle clip systems |
| Use case | Shingle roof line where a tab-style anchor with two holes works better than a side-grip clip |
| Material | UV-stabilized polycarbonate or polypropylene |
| Cold-climate rated | Yes (no brittle failure at sub-freezing temps) |
| Reusable | Yes — multiple seasons with proper takedown |
| Pack sizes | See variant options |
Who this clip is built for
High-volume residential roofline runs (50–300 ft)
The volume install. Wedge geometry self-aligns on a standard 3-tab or architectural shingle edge in under 2 seconds. A 200-clip residential roofline installs cleanly in under 90 minutes once the stringer is pre-built. Pre-bulb and pre-clip the stringer at the shop, drop into a labeled garbage can, snap into place on the roof — zero ladder time fighting individual clips.
Mixed-substrate properties (shingle + gutter + facia in one install)
The big-win use case for Wedge over single-purpose clips. A typical residential install runs the main facade on shingle, the side wings on gutter lip, and the front porch on facia. With Wedge, one SKU covers all three surfaces — you don’t swap clip types mid-install, you don’t carry three boxes on the truck, you don’t end up with leftover specialty clips at season’s end.
Apprentice-friendly first clip
The clip new contractors learn on. Parapet clips need the installer to read the tile or stone cap profile and choose the right orientation. Magnetic clips need a steel substrate (and a deflection test before the customer signs the bid). Wedge is the no-decision clip — if the substrate is shingle or gutter, the Wedge works. Day-one crew members are productive within an hour.
What this clip works with
- Bulbs
- Any C9 (E17 base) LED bulb — Tuff Bulbs C9, Minleon V2 C9, and other E17 LED variants. The clip holds the bulb base; bulb type is independent. Shop C9 bulbs
- Wire
- C9 SPT-1 (0.030″ jacket) or SPT-2 (0.045″ jacket) socket wire. Both 18 AWG copper. The clip clamps to the wire at the socket, jacket spec is independent. Shop SPT-1 socket wire
- Mounting surfaces
- Standard 3-tab shingle, architectural shingle, K-style residential gutter, half-round gutter, painted aluminum facia. NOT for: Spanish or concrete tile (use Tuff Tile Clip), parapet stone caps (use Parapet Clip), steel awning substrate (use Tuff Mag).
- Install conditions
- Outdoor seasonal use. Freeze-thaw stable to −20°F. Polycarbonate construction does NOT go brittle in cold like cheap styrene or PVC clips do.
- Will NOT work with
- C7 bulbs (E12 base — use C7 2-hole shingle tab instead). Bare wire / non-socketed wire. Painted-over gutter where the lip is sealed shut.
2-hole shingle tab vs 2-hole shingle tab
| Spec | 2-hole shingle tab | 2-hole shingle tab |
|---|---|---|
| Primary use | Shingle roof line where a tab-style anchor with two holes works better than a side-grip clip | Shingle / gutter universal |
| Bulb compatibility | Used with screw-mounted shingle clip systems | C9 E17 base |
| Best for | Shingle roof line where a tab-style anchor with two holes works better than a side-grip clip | Volume residential roofline (~80% of installs) |
See all C9 clips side by side →
How to install
- Pre-bulb and pre-clip the stringer at the shop. Roll out the C9 socket wire on a workbench. Twist a bulb into each socket. Snap a 2-hole shingle tab onto each bulb base. Coil the assembled stringer into a labeled garbage can — one can per house — for transport. This is the 1-hour shop step that converts to a 30-minute install on the roof.
- On the roof: snap the wedge onto the shingle edge. Walk the eave with the can of pre-assembled stringer. At each clip, push the Wedge geometry down onto the shingle edge from above — the clip self-aligns and seats by friction in under 2 seconds. For gutter runs, the same clip snaps over the gutter lip the same way. No nails, no staples, no adhesive.
- Connect power and walk-test at dusk. Run the male plug to the nearest GFCI outlet via outdoor-rated extension cord. Walk back 30–40 ft from the property at dusk. Confirm the line is straight, every bulb lights, and no clip has popped off (shouldn’t happen with Wedge — the friction fit is permanent until you pull). Mid-roof clip swaps cost 4x the time of pre-mount swaps, so test before you walk away.
Certifications and compliance
- cETLus mark — The clip is tested as part of the cETLus-listed seasonal lighting system (Intertek file 5019711). Equivalent to UL Listed for code-compliant installations in the US + Canada.
- UV-stabilized polycarbonate — Not styrene (which yellows + cracks in season-two sun) and not PVC (which goes brittle below freezing). Polycarbonate handles the install / takedown / store / reuse cycle for 5+ seasons.
- No roof damage warranty — Zero nails, zero staples, zero adhesive. The clip snaps to the shingle edge by friction; no callbacks for shingle repair after takedown.
- Freeze-thaw rating — Stable to −20°F install conditions. Tested through Minnesota / Wisconsin / North Dakota winter install cycles.
Warranty
Multi-season reuse warranty on 2-hole shingle tabs from Christmas Lights HQ. Covers cracked, broken, or UV-degraded clips returned within 5 seasons of purchase under normal install conditions.
Not covered: clips lost in storage (count your pack at takedown), clips run over by lawn equipment, clips snapped by attempted use on tile or stone (wrong clip type — use Parapet or Tuff Tile instead), animal chew damage.
Full warranty terms → | Warranty claim contact →
Questions contractors actually ask
What surface does the 2-hole shingle tab mount to?
Shingle roof line where a tab-style anchor with two holes works better than a side-grip clip. Check the bag label for the specific surface rating before install. Cross-matching clips to the wrong surface causes them to pop off mid-season.
Will the 2-hole shingle tab damage my roof?
No — properly seated, the clip grips the surface mechanically without piercing or adhering. The clip's grip points are designed to release with a gentle upward pull at takedown.
What bulb does the 2-hole shingle tab fit?
Used with screw-mounted shingle clip systems. Verify by holding the clip up to your bulb — the clip's socket cradle should match the bulb's base shoulder profile.
How long do these clips last?
Multiple seasons with proper takedown. UV-stabilized plastic resists yellowing and cold-cracking. Year-three look matches day-one look as long as the clip is removed from the roof after each season (year-round exposure ages the plastic 2-3x faster).
Customer reviews
Complete the clip + line install
Orders placed before 2 PM ET ship the same day. Free shipping on orders over $349. Most orders arrive in 2-5 business days via UPS or FedEx Ground.