C7 Tuff Clip - Shingle Clip

Why the C7 Tuff Shingle Clip earns its place on the contractor truck

The C7 Tuff Shingle Clip is engineered for asphalt shingle roofs where bulb orientation matters. Flips each C7 bulb to face horizontally outward toward the street instead of pointing straight up at the sky — the difference between a roofline that reads clean from the curb and one that lights up the underside of the eaves. Built with Flex-Over-Bulb slide-over technology and the same heavy-duty UV-stabilized plastic as the rest of the TuffClips family.

Built for the Job

Horizontal bulb orientation on shingles. This is the whole reason the clip exists. When installed on an asphalt shingle roof, the Tuff Shingle Clip rotates each C7 bulb to face straight out toward the street rather than pointing up. The display reads bright and clean from the ground instead of wasting half its light into the sky.

Vertical orientation on gutters. Mount the same clip on a gutter and the bulb sits vertically — the standard upright orientation. One clip, two install positions, full coverage of mixed-surface rooflines without swapping products mid-job.

Flex-Over-Bulb slide-over technology. Like the Flex Clip, Tuff Tab, and Wedge Clip, the Tuff Shingle slides over a C7 bulb that's already screwed into the socket. Pre-bulb your strands in the shop, deploy on-site, and clip as you install. Reverses the old clip-first workflow that's been costing contractors time on ladders for decades.

Fits all standard C7 socket wire. Works with the E12 candelabra base used on every major brand of C7 stringer and bulk socket wire on SPT-1 and SPT-2 line. Drop onto your existing setup — no compatibility guesswork.

UV-stabilized heavy-duty plastic. Break-resistant construction, the same material used across the TuffClips lineup. Survives ladder bumps, freeze-thaw cycles, summer UV, and the mechanical stress of repeat install and takedown across multiple seasons.

Designed for Speed

Slide-under installation on shingles. Lift the shingle edge, slide the clip into place, and the bulb-and-socket locks in horizontally. No tools, no fasteners, no drilling, no damage to the roof.

Clean, hidden-hardware look. The clip body tucks under the shingle so all that's visible from the street is the bulb itself — facing forward, evenly spaced, professionally aligned. The kind of finish that wins commercial bids and gets referrals from neighbors.

Stays with the lights at takedown. Like the rest of the TuffClips lineup, the clip locks to the bulb-and-socket and comes off the roof with the lights at the end of the season. No clips left embedded in shingles, no hardware loss, no end-of-season cleanup runs.

Why Horizontal Bulb Orientation Matters

A C7 bulb mounted vertically on a shingle roof points half its light straight up — into the sky, into the underside of the soffit, anywhere except where the customer is paying you to put it. The Tuff Shingle Clip rotates each bulb to face horizontally outward, projecting full brightness toward the street where it actually gets seen. The same install, the same bulbs, the same wire — but the display reads twice as bright from the curb because the photons are going where the customer wants them.

C7 bulbs are smaller than C9, which means every bit of forward projection counts. Horizontal orientation maximizes the visible light output of a smaller bulb — making C7 installs on shingle roofs look as crisp and bright as the customer pictured when they signed the bid.

Trusted in Our Contractor Community

40,000+ professional Christmas light installers in our network run TuffClips on residential and commercial routes every season. Pair the Tuff Shingle Clip with Tuff Bulbs for a complete install system built by contractors, for contractors.

Note: Bulbs and stringers sold separately.

Stock for the Season

Available in contractor-sized bags and bulk cases for full-season trailer stocking. Contractor pricing applies on case quantities — reach out for a quote on bigger builds.

Verified specifications

Every value below is pulled from the printed bag label / spec sheet. No marketing inflation.

Who this clip is built for

What this clip works with

Bulbs

C7 (E12 base) — fits any C7 socket wire stringer.

Socket wire

C7 SPT-1 (indoor/sheltered) or SPT-2 (outdoor cold-climate). SPT-2 recommended for residential roofline. Shop wire

Mount surfaces

Shingle edge / drip edge — slides under the first row of shingles.

Will NOT work with

Tile roof (use tile clip), metal roof (use Tuff Mag), gutter mount (use C7 Tuff Clip or Wedge variant).

Shingle Clip vs gutter clip on shingle homes

See the full clip lineup →

How to install

1. Pre-bulb the stringer at the ground. Mount bulbs into the stringer BEFORE going up the ladder. Walk the line plugged in to test for dead bulbs.
2. Pre-clip the stringer at the ground. Slide clips onto every socket while the line is laid out. Faster than clipping on the roof.
3. Slide tab/clip under the shingle edge. Push the tab under the first row of shingles at the eave line. Sandwich the bulb in the front face of the clip.
4. Verify and stake the supply cord. Confirm the full line lights from the supply end. Route the supply cord to the outlet via stake-clips.

Build quality + materials

• UV-stabilized polymer — resists yellowing, cold-cracking, and freeze-thaw degradation across multiple seasons.
• Shingle-tab profile — slides under shingle edge without prying or damage.
• Reusable — multiple seasons with proper takedown. Year-three look matches day-one look as long as the clip is removed from the roof after each season.

Warranty

1-year manufacturer warranty on the C7 Tuff Shingle Clip from Christmas Lights HQ. Covers manufacturing defect on first season of use.

Not covered: shingle damage from improper install, damage from year-round outdoor exposure, animal damage.

Full warranty terms →

Questions contractors actually ask

Customer reviews

Build the complete shingle-mount C7 line

Orders placed before 2 PM ET ship the same day. Free shipping on orders over $349. Most orders arrive in 2-5 business days via UPS or FedEx Ground.