Open boxes of Christmas light installation supplies, including wire spools, C9 bulbs and roof clips, on a warehouse workbench with stacked cartons behind

Searching christmaslights.com? Where Contractors Buy Christmas Lights Wholesale

Quick answer: Christmas light contractors buy from a wholesale supplier built for installers, not a retail store built for one house. At Christmas Lights HQ, look at the 2,000 ft Contractor Pack first, then step down to the 1,000 ft Starter Pack if you are new, since it handles 5 to 6 homes. Apply for the wholesale program to get 5% off list.

If you typed christmaslights.com into a search bar looking for a supplier, this guide is for you. You are not shopping for one house. You are stocking a route. That changes where you buy, how you buy, and what you put in the first order.

I ran 4 crews and built a Christmas light install business past $1M in annual revenue before I sold it in 2018. Supply made or broke every season. Christmas Lights HQ is the wholesale supply arm I built for installers, and our Pro Christmas light kits are where I tell contractors to start.

Where do Christmas light contractors buy their lights wholesale?

Contractors buy from a wholesale supplier that sells pro-grade C9 bulbs, socket wire, plugs, and clips in bulk, matched to each other. Christmas Lights HQ is that supplier for the ChristmasLights.io community of 43,000+ contractors. You buy kits or bulk spools, apply for wholesale pricing, and reorder the same lines every season.

A real contractor supplier carries the parts you burn through on a route, not boxed strands. Here is what that looks like on the HQ shelf:

  • C9 SPT-1 socket wire on 1,000 ft bulk spools in 6, 12, 15, 18, and 24 inch spacing.
  • Pre-cut C9 stringers at 12 inch spacing in 1, 5, 15, 25, 50, and 100 foot lengths.
  • Gilbert plugs for SPT-1 and SPT-2 in packs of 50 and cases of 1,000.
  • Two house C9 LED bulb lines, King Pro Bulbs and Tuff Bulbs.
  • Pro Kits from the Pro Pack 100/125 ft up to the Mega Contractor Pack 4,000 ft.

Searching christmaslights.com? How is retail different from contractor wholesale?

Whatever site you landed on, ask one question. Is it built for a homeowner buying lights for one house, or an installer buying for a whole route? A contractor wholesale supplier sells bulk spools, matched kits, plugs that fit the wire, and a wholesale program for repeat buyers.

Retail ordering works fine for a homeowner. It falls apart when you need the same bulb, the same wire, and the same plug on every house you service. Here is the side-by-side.

Factor Retail ordering Contractor wholesale supply
Built for One house, one season A route of homes, every season
Pricing List price per item Wholesale program at 5% off list, by application
Kits Single strands and sets Pre-matched Pro Kits from 100/125 ft to 4,000 ft
Bulb lines Whatever is on the shelf Two house lines: King Pro and Tuff
Wire Pre-made strands SPT-1 bulk spools in multiple socket spacings
Plugs Molded ends Gilbert plugs matched to SPT-1 or SPT-2
Reorders Hard to match next year Same line every season so bulbs match

Why supply matters to margin: contractor-grade materials run $1.50 to $2.00 per linear foot. Residential C9 roofline installs price at $8.00 to $12.00 per linear foot installed, with takedown included and never billed as a separate line. Buy at retail and you eat into that spread on every job.

What should a Christmas light installer stock before the season starts?

Stock enough C9 socket wire, bulbs, clips, and plugs to cover the jobs you have sold, plus spares. A Pro Kit handles the core in one order. Add SPT-1 wire and Gilbert plugs for custom extension cords, and keep timers on the shelf. Plug type must always match wire type.

  1. A Pro Kit. It ships with bulbs, socket wire, shingle tabs, plugs, and extension cords pre-matched to each other.
  2. Extra SPT-1 socket wire. SPT-1 is 18 gauge wire with 0.030 inch insulation, rated for 7 amps. It is the standard wire for C9 LED roofline runs.
  3. Gilbert plugs that match your wire. SPT-1 plugs fit SPT-1 wire. SPT-2 plugs fit SPT-2 wire. The insulation thickness is different, so they do not cross over.
  4. Custom extension cords. Contractors typically build their own custom-length cords from SPT-1 wire and Gilbert plugs for clean installs. The cords in the kit work fine as backups.
  5. Timers. Keep mechanical, digital, photocell, and Wi-Fi timers on hand so you can match what each customer wants.

Leave permanent lighting off the first order. Most new contractors build on a seasonal C9 roofline route first and add permanent lighting in year two or later, once the install business has cash flow.

Should you buy a 2,000 ft kit or a 1,000 ft Pro Kit for your first order?

Look at the 2,000 ft Contractor Pack first. If you already have a route or run more than one crew, it is the kit built for high volume. If you are brand new, step down to the 1,000 ft Starter Pack. It handles 5 to 6 homes and gives you enough volume to learn the business.

The King Pro C9 SMD Contractor Pack 2,000ft is the high-volume kit, with C9 socket wire, bulbs, Tuff Wedge clips, and Gilbert plugs in one box. The King Pro C9 SMD Starter Pack 1,000ft is the step-down, and it is still the right first order for most new contractors.

I steer new installers away from starting with the smallest sizes. A first season on a tiny kit keeps your average ticket low and leaves you too few jobs to learn the work. With 4 crews on the road, I learned that the order you plan in the fall is the order you live with in December.

Kit Footage Best fit
Mega Contractor Pack 4,000 ft Multi-crew operations stocking a full season
Contractor Pack 2,000 ft Established routes and growing crews
Starter Pack 1,000 ft First season, handles 5 to 6 homes
Pro Pack 200/250 ft First paid jobs or a top-off order
Pro Pack 100/125 ft Smallest complete kit, single add-on job

King Pro Bulbs or Tuff Bulbs: which line fits your jobs?

Both are Christmas Lights HQ house lines, and both are sound choices. For a single recommendation on a first roofline order, we point most crews to King Pro Bulbs. Tuff Bulbs are the alternative line for crews that prefer them. Pick one line and stay on it so your reorders match.

  • Same base. C9 bulbs use an E17 intermediate base. C7 bulbs use an E12 candelabra base, and the two do not swap on the same socket wire.
  • Low draw. Retrofit C9 LED bulbs pull under 1 watt each, against about 7 watts for an incandescent C9.
  • Same kit ladder. King Pro and Tuff each run from the Pro Pack 100/125 ft up to the Mega Contractor Pack 4,000 ft.
  • Wholesale packs. King Pro SMD bulbs also come in Wholesale Packs matched to 12 inch or 15 inch spacing.

Spacing drives bulb count. At 12 inch spacing, a 100 foot run holds 100 sockets. At 15 inch spacing, the same 100 feet holds 80. Order bulbs to the spacing you install, not a guess.

How do you get wholesale pricing at Christmas Lights HQ?

You apply. The wholesale program has one live tier right now, 5% off list, and it opens by application. Once you are approved, we create a personal discount code for your orders. Apply before your big preseason buy so the code is ready when you check out.

Fill out the wholesale application with your business details. The discount stacks onto the kits and bulk spools you already planned to buy, so it pays off fastest on a full-route order.

How do you place a commercial Christmas light order?

Size it the same way you size a residential route: by total linear footage. Then order kits and bulk spools to match. Businesses, HOAs, and property managers buy through the same Pro Kits and bulk lines. Measure every run, pick one spacing, and match plugs to wire before you order.

  1. Measure every run on the property and total the linear footage.
  2. Pick one socket spacing, 12 or 15 inch, so bulb counts stay predictable.
  3. Choose SPT-1 for LED C9 runs. SPT-2 is 18 gauge with 0.045 inch insulation, rated for 10 amps, and fits incandescent bulbs or long high-load runs.
  4. Order wire by the spool. C9 SPT-1 comes on 1,000 ft spools. Magnetic socket spools come in 250 ft and 500 ft lengths for metal surfaces.
  5. Order plugs by the case when the job is big. Gilbert plugs come in cases of 1,000.
  6. Plan circuit loads. A standard 15 amp, 120 volt circuit supplies 1,800 watts. Plan well under that ceiling.
  7. Anchor on the 2,000 ft Contractor Pack, then add bulk spools or step up to the 4,000 ft pack for bigger properties.

Commercial work rewards a clean supply plan. One bulb line, one spacing, and matched plugs make the install faster and the reorder simple next season.

Where are you buying your supply this season, and what is the one item your crew always runs short on?

Ready to stock up for the season?

Shop HQ's Pro Christmas Light Kits collection

Frequently asked questions

where do christmas light installers buy their lights

Installers buy from a contractor wholesale supplier that sells matched C9 bulbs, socket wire, clips, and plugs in bulk. Christmas Lights HQ is the wholesale supply arm built for that. You can order Pro Kits or bulk spools and apply for wholesale pricing.

how many homes does a 1000 ft christmas light kit cover

A 1,000 ft Pro Kit handles 5 to 6 homes. That is why it is the default first order for a new contractor over the 500 ft kit. It gets your average ticket up and gives you enough jobs to learn the business.

how do i get wholesale pricing on christmas lights

At Christmas Lights HQ you apply through the wholesale application. The program has one live tier right now at 5% off list. When you are approved, you get a personal discount code for your orders.

what comes in a pro christmas light kit

An HQ Pro Kit ships with bulbs, socket wire, shingle tabs, plugs, and extension cords, all pre-matched to each other. The extension cords work fine as backups. Most contractors build their own custom-length cords from SPT-1 wire and Gilbert plugs for clean installs.

king pro bulbs vs tuff bulbs which is better

Neither one ranks above the other. Both are Christmas Lights HQ house lines and both are sound choices. For a single first roofline pick, most crews go with King Pro, and Tuff Bulbs are the alternative for crews that prefer them.

About the author: Jason Geiman. Jason Geiman is a retired firefighter who built a Christmas light installation business to $1M+ in annual revenue running 4 crews, sold the install operation in 2018, and now trains 43,000+ Christmas light contractors through ChristmasLights.io. Christmas Lights HQ is the wholesale supply arm of that same ecosystem.