Christmas light installation supplies laid out on a workbench: C9 bulbs, spools of socket wire, clips, plugs, and an outdoor timer.

Christmas Contractor Supply List: A Line-by-Line Wholesale Order for Your First Route

Quick answer: A Christmas contractor needs C9 LED bulbs, SPT-1 socket wire, matching SPT-1 Gilbert plugs, roofline clips, timers, and extension cords before the first install. The simplest way to buy them matched is a Pro Kit. Look at the 2,000 ft Contractor Pack first, and step down to the 1,000 ft Starter Pack, which covers 5 to 6 homes, if that fits your sold work better.

A Christmas contractor gets paid on the roof. The season gets won or lost on the supply order. Buy the wrong wire, the wrong plug, or too little of either, and your crew stands in a driveway with nothing to hang.

I started as a firefighter, then built a Christmas light install business to $1M+ a year running 4 crews before I sold it in 2018. Every one of those crews ran off the same short supply list. This post is that list, line by line, with the counts and the reasons.

What does a Christmas contractor need to buy before the first install?

A Christmas contractor needs six things on the shelf before the first install: C9 LED bulbs, SPT-1 socket wire, Gilbert plugs, roofline clips, timers, and extension cords. Buy them matched to each other. The fastest way to do that is a Pro Kit, which ships those core parts in one box.

Our Pro Kits ship with bulbs, socket wire, shingle tabs, plugs, and extension cords, all pre-matched. That covers five of the six lines below. Timers are the one line you add on top.

Line item What to order Why it matters
C9 LED bulbs King Pro Bulbs or Tuff Bulbs One bulb per socket, plus spares for service calls
Socket wire C9 SPT-1 socket wire at 12 or 15 inch spacing Spacing sets your bulb count and your look
Plugs SPT-1 male and female Gilbert plugs Lets you cut every run to the exact length of the house
Clips One roofline clip per socket Holds every bulb straight and at the same angle
Timers Mechanical, digital, photocell, or Wi-Fi The customer never has to touch the display
Extension cords Kit cords as backups, custom cords for clean installs Gets power from the outlet to the roofline

Which Pro Kit should you order first?

Start by looking at the 2,000 ft Contractor Pack. It is the kit built for a contractor who plans to run a full route this season. If that is more than your sold work supports, step down to the 1,000 ft Starter Pack. It covers 5 to 6 homes and is still the right first order for most new contractors.

Here is why I start the conversation at 2,000 ft. Running out of wire in the middle of the season costs you jobs. Extra wire on the shelf does not go bad. It goes on the next house.

The 1,000 ft kit is the step-down, and it is a strong one. Five to six homes gets your average ticket up. It also gives you enough installs to learn the work instead of guessing at it.

Kit Size Good fit for
Contractor Pack 2,000 ft A contractor planning a full route this season
Starter Pack 1,000 ft A new contractor. Covers 5 to 6 homes
Mega Contractor Pack 4,000 ft Multiple crews or commercial work
Pro Pack 200/250 ft A single job or a top-up order
Pro Pack 100/125 ft A small add-on run or a test order

The King Pro, Tuff Bulbs, and Minleon V2 lines each follow that same ladder. Pick your bulb line first. Then pick your size.

Should you buy a kit or build an order by the piece?

Buy a kit for your first order, then reorder by the piece. A kit removes the matching mistakes that cost new crews time: wrong base, wrong plug, wrong spacing. Once you know your spacing and your bulb line, bulk spools, bulb packs, and plug cases let you restock only what the jobs used.

Matching matters more than new contractors expect. C9 bulbs use an E17 intermediate base. C7 bulbs use an E12 candelabra base. The two do not swap on the same socket wire. A kit makes that choice for you.

Reorders are where piece buying pays off. Our C9 SPT-1 socket wire comes on 1,000 ft bulk spools in 6, 12, 15, 18, and 24 inch spacing. King Pro SMD bulbs also come as Wholesale Packs matched to 12 inch or 15 inch spacing. You buy the spool and the matching bulb pack, and the counts line up.

The money side is simple. Materials at contractor pricing run $1.50 to $2.00 per linear foot. Residential C9 roofline installs run $8.00 to $12.00 per linear foot installed. That installed price includes materials, labor, takedown, and storage. Good supply is a small slice of the job. Do not cut corners on it.

Which C9 bulbs should you stock: King Pro or Tuff Bulbs?

Christmas Lights HQ sells two house C9 LED lines: King Pro Bulbs and Tuff Bulbs. Both are my lines and both belong on a pro roofline. If you want one answer for a first order, I point most crews to King Pro. Tuff Bulbs is the alternative for crews that prefer it.

This is a choice of fit, not a ranking. Either line is a sound pick. What hurts you is mixing lines on the same house, because the customer sees the difference from the street.

  • Pick one line for your first season. Your spares, your service calls, and your reorders all stay simple.
  • Count bulbs from your spacing. At 12 inch spacing, a 100 foot run holds 100 sockets. At 15 inch spacing, the same 100 feet holds 80 sockets.
  • Order spares. Every service call goes faster when the right bulb is already on the truck.
  • Stay with LED. A retrofit C9 LED bulb draws under 1 watt. An incandescent C9 draws about 7 watts.

You can see both lines side by side in our C9 and C7 LED bulb collection.

What wire, plugs, and clips do you need on every job?

Every job needs SPT-1 socket wire, SPT-1 Gilbert plugs, and a clip for every socket. SPT-1 is the standard socket wire for C9 LED roofline runs. It is 18 gauge wire with 0.030 inch insulation, rated for 7 amps. That rating is plenty for LED bulbs that draw under 1 watt each.

SPT-2 is the heavier option. It is 18 gauge wire with 0.045 inch insulation, rated for 10 amps. Crews choose it for incandescent bulbs or long, high-load runs. For a first-season residential route on LED, SPT-1 is the wire to stock.

Plug type must match wire type. SPT-1 plugs fit SPT-1 wire. SPT-2 plugs fit SPT-2 wire. The insulation thickness is different, so a mismatched plug will not seat right. Check the label before you order a case.

Gilbert plugs are how you get custom lengths. We sell male and female plugs for SPT-1 and SPT-2 in packs of 50 and cases of 1,000, in black, brown, green, and white. Female plugs come with or without a knockout tab.

The extension cords that ship in a kit work fine as backups. For clean installs, contractors typically make their own custom-length cords from SPT-1 wire and Gilbert plugs. No coiled-up extra cord sitting in the flower bed.

Clips are a one-to-one count. One clip per socket. Order extra, because clips break and get dropped off ladders.

Which timers should you install?

Put a timer on every install. The four types contractors install are mechanical dial timers, digital programmable timers, photocell dusk-to-dawn timers, and Wi-Fi app-controlled timers. Pick one type as your standard so every crew member sets it the same way, then carry a second type for the customer who asks for more control.

Timer type How it runs Good fit for
Mechanical dial Pins on a dial set the on and off times Simple installs and crews that want no programming
Digital programmable Set on and off times on a screen Customers who want an exact schedule
Photocell Turns on at dusk by sensing light Displays that should follow the sunset all season
Wi-Fi app-controlled Runs from a phone app Customers who want to change it themselves

Plan your load in plain terms. A standard 15 amp, 120 volt circuit supplies 1,800 watts. Pros plan well under that ceiling. LED bulbs make that easy, but the timer and the circuit still set the limit.

You can compare all four types in our Christmas light timers collection.

When should you place a wholesale order?

Place your wholesale order before your install calendar fills, not after. Supply should be in your shop and tested before the first crew rolls. If you are ordering in season, order to the jobs you have already sold, and let deposits carry the cost. I take 50% at booking for that reason.

Deposits at booking run 35% to 50% of the total. That money is what pays for materials. Sell the job, collect the deposit, then place the order for that footage.

If you plan to keep ordering, apply for wholesale. Our program has one live tier right now: 5% off list. It opens with an application, and you get a personal discount code when you are approved. You can fill out the wholesale application in a few minutes.

How do you size a commercial order?

Size a commercial order from measured footage, not from a guess. Walk the property, measure every run, pick your spacing, then count sockets, bulbs, clips, and plugs from that number. For bigger properties the kit ladder goes up to the 4,000 ft Mega Contractor Pack, and plugs come in cases of 1,000.

  1. Measure every run. Rooflines, parapets, entrances, and signs each get their own number.
  2. Pick one spacing for the whole property. Mixed spacing looks wrong from the parking lot.
  3. Count sockets from the footage. At 12 inch spacing, 100 feet is 100 sockets. At 15 inch spacing, it is 80.
  4. Match the wire to the load. SPT-1 is the standard for LED. SPT-2 is the pick for long, high-load runs.
  5. Count your power points. Each one needs plugs, a cord, and a timer.
  6. Add spares. Commercial clients expect fast service when a bulb goes out.

Storefronts, HOA entrances, and property managers all work the same way. The footage is bigger. The list does not change.

That is the whole supply list. Six lines, matched to each other, sized to the work you have sold. What is the one item you ran short on during your first install, or the one you are most worried about running short on this season?

Ready to stock up for the season?

Shop HQ's Pro Christmas Light Kits collection

Frequently asked questions

what supplies do i need to start a christmas light installation business

You need C9 LED bulbs, SPT-1 socket wire, matching SPT-1 Gilbert plugs, roofline clips, timers, and extension cords. A Pro Kit ships with the bulbs, socket wire, shingle tabs, plugs, and extension cords already matched. Add timers on top and you can hang your first job.

how many homes does a 1000 ft christmas light kit cover

A 1,000 ft Pro Kit handles 5 to 6 homes. That is why it is the default first order for a new contractor. It gets your average ticket up and gives you enough installs to learn the business.

should i buy the 1000 ft or 2000 ft christmas light kit

Look at the 2,000 ft Contractor Pack first if you plan to run a full route this season. Step down to the 1,000 ft Starter Pack if that fits your sold work better. Extra wire and bulbs carry over to the next job, so the bigger kit does not go to waste.

do spt-1 plugs work on spt-2 wire

No. Gilbert plugs are made for a specific wire type. SPT-1 plugs fit SPT-1 wire and SPT-2 plugs fit SPT-2 wire, because the insulation thickness is different. Match the plug to the wire every time you order.

how do i get wholesale pricing on christmas lights as a contractor

Apply to the Christmas Lights HQ wholesale program. It has one live tier right now, which is 5% off list. Once you are approved, you get a personal discount code to use on your orders.

About the author: Jason Geiman. Jason Geiman is a retired firefighter who built a Christmas light installation business to $1M+ in annual revenue running 4 crews, sold the install operation in 2018, and now trains 43,000+ Christmas light contractors through ChristmasLights.io. Christmas Lights HQ is the wholesale supply arm of that same ecosystem.