Quick answer: Christmas contractors need C9 LED bulbs, SPT-1 socket wire, clips, Gilbert plugs, and timers before the first install. A Pro Kit ships the bulbs, wire, shingle tabs, plugs, and extension cords pre-matched. Look at the 2,000 ft kit first. Step down to the 1,000 ft kit, which handles 5 to 6 homes, if that fits your first season better.
Christmas contractors make their money on the roof. But the season is won or lost in the supply order. Buy too little and your crew sits while you wait on a box. Buy the wrong parts and nothing fits together. This guide covers what to stock, where to buy it, and which Pro Kit to order first.
In the video above, I take on a question I hear every season: should you buy straight from the manufacturer? Watch it, then use this post as your buying list. I built a Christmas light install business to $1M+ a year with 4 crews before I sold it in 2018. This is the list I would hand a new crew lead.
What do Christmas contractors need to buy before the season starts?
You need five things for a C9 roofline job: bulbs, socket wire, clips, plugs, and a timer. Every part has to match the others. The fastest way to get the first four is a Pro Kit. It ships with bulbs, socket wire, shingle tabs, plugs, and extension cords already matched to each other.
- C9 LED bulbs. C9 bulbs use an E17 intermediate base. C7 bulbs use an E12 candelabra base. The two do not swap on the same socket wire.
- Socket wire. SPT-1 is the standard socket wire for C9 LED roofline runs. You cut it to fit each house.
- Clips. Pro Kits ship with shingle tabs. They hold each bulb in line along the roof edge.
- Gilbert plugs. These slide onto cut wire to make a male or female end. Plug type must match wire type.
- Timers. These do not come in the kit. Add them to the same order so every job turns on and off by itself.
Notice what is not on the list: permanent lighting. Most new contractors build on a seasonal C9 roofline route first. They add permanent lighting in year two or later, once the install business has cash flow. Your first order should be roofline supply.
Where do Christmas contractors buy wholesale supply?
Christmas contractors buy from a wholesale supplier that sells pro-grade parts in bulk, not from a retail store shelf. Christmas Lights HQ is the wholesale supply arm of my business. We sell kits, bulk spools, bulbs, plugs, clips, and timers to install companies. Our wholesale program has one live tier at 5% off list.
You open that tier with a short wholesale application. Once you are approved, we create a personal discount code for you. You use it on every order after that.
When you size up any supplier, ask three questions. Do they stock every part of the system in one place? Do the parts match each other? Can you reorder small amounts fast when a job runs long? If the answer to any of those is no, keep looking.
Why do Christmas contractors use pro-grade supply instead of retail store lights?
Pro-grade supply lets you cut every run to fit the house. Socket wire comes on a spool. You cut it to length, add plugs, and screw in bulbs. Retail strands come in fixed lengths, so you end up with extra wire hanging off a corner. A custom fit is what the customer pays for.
Service is easier too. When one bulb goes out, you swap one bulb. You do not pull a whole strand off the roof.
Power is the other reason. A retrofit C9 LED bulb draws under 1 watt. An incandescent C9 draws about 7 watts. A standard 15 amp, 120 volt circuit supplies 1,800 watts, and pros plan loads well under that ceiling. LED bulbs give you a lot more room on each circuit.
The money works as well. Materials at contractor-grade pricing run $1.50 to $2.00 per linear foot. Residential C9 roofline installs run $8.00 to $12.00 per linear foot installed. That price includes materials, labor, takedown, and storage when you have your own building. Good supply is a small slice of a good job.
Which Pro Kit should a Christmas contractor order first?
Look at the 2,000 ft Contractor Pack first. If you plan to run a full route this season, it is the kit to stock. If that is more than your first season needs, step down to the 1,000 ft Starter Pack. It handles 5 to 6 homes and is still the right first order for most new contractors.
Here is why I do not send new crews lower than 1,000 ft. Those 5 to 6 homes get your average ticket up. They also give you enough volume to learn the business. A handful of feet on one house does not teach you much.
The kit ladder has more steps when you need them. Pro Packs come in 100/125 ft and 200/250 ft sizes for small jobs and top-offs. The Mega Contractor Pack is 4,000 ft for crews with a bigger route.
You also pick a bulb line. King Pro Bulbs and Tuff Bulbs are both my lines, and both are a sound choice. When a contractor wants one answer for a first roofline order, I point most crews to the King Pro Pro Kits. Crews that prefer Tuff Bulbs can order the same sizes in the Tuff Bulbs Pro Kits. The Minleon V2 line follows the same ladder.
How do the 2,000 ft and 1,000 ft Pro Kits compare?
Both kits ship the same kinds of parts, pre-matched. The difference is footage and how much season you are buying for. The 2,000 ft kit gives you double the wire to sell before you reorder. The 1,000 ft kit ties up less cash and still handles 5 to 6 homes.
| 2,000 ft Contractor Pack | 1,000 ft Starter Pack | |
|---|---|---|
| Footage | 2,000 ft | 1,000 ft |
| What ships | Bulbs, socket wire, shingle tabs, plugs, extension cords | Bulbs, socket wire, shingle tabs, plugs, extension cords |
| Homes it handles | Double the footage of the Starter Pack | 5 to 6 homes |
| Best fit | A full route this season, or jobs already sold | A first season where you are still building the route |
| Bulb lines | King Pro, Tuff Bulbs, Minleon V2 | King Pro, Tuff Bulbs, Minleon V2 |
My pick: Price out the 2,000 ft Contractor Pack first. If the footage is more than you can sell this season, drop to the 1,000 ft Starter Pack. Do not go smaller for a first order.
What goes into a kit: bulbs, socket wire, plugs, clips, and timers?
A Pro Kit ships with bulbs, socket wire, shingle tabs, plugs, and extension cords. Every part is matched to the others, so the bulbs fit the sockets and the plugs fit the wire. Timers are a separate buy. Add them to the same order so you are not waiting on a second box.
Socket spacing changes your bulb count
At 12 inch spacing, a 100 foot run holds 100 sockets. At 15 inch spacing, the same 100 feet holds 80 sockets. Know your spacing before you count bulbs for a reorder.
Wire and plugs must match
SPT-1 wire is 18 gauge with 0.030 inch insulation and is rated for 7 amps. SPT-2 is 18 gauge with 0.045 inch insulation and is rated for 10 amps. Crews choose SPT-2 for incandescent bulbs or long high-load runs. SPT-1 plugs fit SPT-1 wire. SPT-2 plugs fit SPT-2 wire. They do not cross over, because the insulation thickness is different.
Extension cords
The extension cords in the kit work fine as backups. For clean installs, contractors typically build their own cords. They cut SPT-1 wire to the exact length and add Gilbert plugs. No extra cord lies in the flower bed.
Timers
There are four timer types: mechanical dial, digital programmable, photocell (dusk to dawn), and Wi-Fi app-controlled. Pick one type and stock it for every job. Your crew learns one setup, and your service calls get shorter.
When should Christmas contractors place their wholesale order?
Order before your first install is on the calendar, not after. You want the kit in your shop with time to test bulbs, build cords, and load the truck. If you are selling jobs right now and have no supply, order today. Size the kit to the jobs you have already sold.
Your deposits help pay for the order. A deposit at booking runs 35% to 50% of the total. I prefer 50%. A strong deposit means the customer's money buys the materials for the job, not yours.
How do you reorder mid-season without stalling a crew?
Reorder before you run out, not when you run out. Check your wire and bulb counts after every job. When a sold job will eat what you have left, place the order that day. Small top-offs can come from pre-cut stringers, plug packs, or a smaller Pro Pack.
- Stringers. Pre-cut C9 socket wire at 12 inch spacing comes in 1, 5, 15, 25, 50, and 100 foot lengths.
- Plugs. Male and female Gilbert plugs come in packs of 50 and cases of 1,000.
- Bulk wire. C9 SPT-1 socket wire comes on 1,000 ft spools in 6, 12, 15, 18, and 24 inch spacing.
- Small kits. A 100/125 ft or 200/250 ft Pro Pack covers one extra job without a big buy.
Two rules keep a reorder from causing new problems. Stay with the wire type you started with, so your plugs still fit. Stay with the bulb line you started with, so every roofline on your route looks the same.
What is the first thing going on your supply order this season?
Ready to stock up for the season?
Frequently asked questions
what do christmas light contractors buy wholesale
They buy C9 LED bulbs, SPT-1 socket wire, clips, Gilbert plugs, and timers. A Pro Kit covers the bulbs, socket wire, shingle tabs, plugs, and extension cords in one order, with every part pre-matched. Timers are bought on their own.
what size pro kit should a new christmas light contractor order
Look at the 2,000 ft Contractor Pack first if you plan to run a full route. If that is more than your first season needs, step down to the 1,000 ft Starter Pack. It handles 5 to 6 homes and is the right first order for most new contractors.
how do i get wholesale pricing on christmas lights
Christmas Lights HQ has one live wholesale tier at 5% off list. You apply through the wholesale application. Once you are approved, a personal discount code is created for you to use on your orders.
can i use store bought christmas lights for an install business
Retail strands come in fixed lengths, so you cannot cut them to fit a roofline. Pro-grade socket wire is cut to length for each house, and bulbs are replaced one at a time. That custom fit is what customers pay a contractor for.
do pro kits come with timers and extension cords
Pro Kits ship with extension cords, along with bulbs, socket wire, shingle tabs, and plugs. Timers are not in the kit, so add them to the same order. Contractors typically build custom cords from SPT-1 wire and Gilbert plugs and keep the kit cords as backups.